Share To Facebook Share To Twitter Share To Plurk Share on Google+

Warping Machine ø30"x21"

Warping Machine ø30"x21"
Product Name : Warping Machine ø30"x21"
Product No : ACS-1000-N
Inquiry
Product Introduction
ModelACS-1000-N
Operation range The applicable Aluminum Beam flange diameter is up to 762mm. The diameter of Beam Barrel is 300mm with total length 535mm.
Max. Tension 250 newton.
Braking equipment The barometric and hydraulic disc brake.
Control system Drapper Warper machine is controlled by the computer system, which regulates the yarn tension constanly.
Rola structure It is composed of two durable solid rolas. The yarn elasticity can be adjusted by the angle and the electronic control unit.
Speed 1000m/min Pull 170N Break 600Nm
Loading 20KVA Barometric 6BAR Beam clip Barometric control
Beam hoist Barometric control Rola diameter ø79.5    
  • The entire process is controlled by PLC. Any failure will be shown on the monitor for immediate troubleshooting. The production quality data can be recorded.
  • The tension balance system can control the yarn tension accurately and ensure the circumference of the beam is equal.
  • A lot of mechanisms are using air unit system, may more accuracy and stabling between each mechanisms.
  • The barometric and hydraulic disc brake can be used frequently, and adjusted according to the beam dimension to easy maintenance and stable functions.
  • It can reduce the cost and increase the productivity.
Back