Type of Yarn Tension
Product Introduction
SHD-420B
SHD-420C
SHC-420A-0
Quality:
- Different yarn tensions of the package are equalized during yarn draw-off.
- Constant yarn tension level at each individual speed over 300m per-minute.
- Extensive detection of tight ends before yarn breakages can occur.
- All broken ends can be easy picked up near by the packing.
Productivity:
- Higher yarn speed achieved without difficulty by means of controlled yarn draw-off.
- No running-out ends as possible yarn breakages are detected in advance The RED DEER Hydraulic Yarn Tension Regulator works on the friction principle with hydraulic damping action and when required, with an integrated Pre-tensioning device. Of special importance are integrated stop motions which operate during loose-tensioning And yarn breakage.
Tension Regulators as follows:
- Compensation of tension differences in the yarn packages being presented.
- The pre-set yarn tension remains constant at all speeds from 300 to 1500 m per-minute, irrespective of the package diameter at that time.
- Absorption of tension peaks by the hydraulic damping action of the compensating lever, leading to a smooth running of the yarn sheet.
- Stop motion for broken ends always takes effect near the package, resulting in immediate correction and avoidance of running-out yarn ends.
- Speedy alteration of basic setting as all vertically-arranged yarn tensioners are connected in groups.
- Resistant to dirt as there are no exposed revolving parts: units therefore require minimum maintenance.
- There are various models of yarn tension regulators available dependent on purpose and yarn being used More than 1.3 million Red Deer Hydraulic Yarn Tension regulators are in current use in the weaving and warp knitting sectors.
- Yarn will not jump easily which result in yarn breakage.
TWO POST TYPE
- 4-ring，6ring Tension